Residential, Industrial, Commercial, Multiple housing, Farm clean water use
Pump Parts Type
Submersible Well Pump
Primary Voltage
230 V
Multi-Stage Submersible Well Pump: 12-Stage Stainless Steel Design for Deep Well Applications
The Myers 3/4 HP submersible well pump (Model 2ST72-8PLUS-P4) delivers exceptional groundwater extraction performance with its advanced 12-stage centrifugal design, engineered for residential wells, agricultural irrigation systems, and commercial water supply applications.
This premium deep well pump from Plumbing Supply And More combines robust stainless steel construction with cutting-edge hydraulic technology to ensure reliable water delivery from depths up to 390 feet with maximum efficienc
The Myers 3/4 HP submersible well pump (Model 2ST72-8PLUS-P4) delivers exceptional groundwater extraction performance with its advanced 12-stage centrifugal design, engineered for residential wells, agricultural irrigation systems, and commercial water supply applications.
This premium deep well pump from Plumbing Supply And More combines robust stainless steel construction with cutting-edge hydraulic technology to ensure reliable water delivery from depths up to 390 feet with maximum efficiency and longevity.
Advanced Multi-Stage Pump Technology
The revolutionary 12-stage impeller design maximizes water pressure and flow efficiency through precision-engineered hydraulic chambers that optimize performance at every operational level.
Each individual stage features carefully balanced impellers and diffusers manufactured from corrosion-resistant materials, creating a cascading pressure boost that delivers consistent performance across varying well conditions and seasonal water table fluctuations.
This multi-stage centrifugal pump technology significantly outperforms traditional single-stage submersible pumps by providing smoother operation, reduced energy consumption, and enhanced pressure stability.
The staged design allows the pump to maintain optimal efficiency even when dealing with varying static water levels, drawdown conditions, and fluctuating household demand patterns throughout peak usage periods.
Premium Stainless Steel Construction
Built with marine-grade 304 stainless steel housing and components, this Myers submersible well pump resists corrosion, scale buildup, and chemical degradation in harsh groundwater environments.
The stainless steel pump casing provides superior protection against aggressive water conditions including high mineral content, acidic pH levels, and abrasive sand particles commonly found in deep water wells.
The pump's stainless steel impellers and wear rings maintain precise tolerances and smooth operation over extended service periods.
Internal components including the motor housing, pump bowl assembly, and discharge head feature corrosion-resistant finishes that prevent rust formation and material degradation, ensuring consistent performance and extending operational lifespan significantly compared to cast iron alternatives.
High-Performance Motor & Electrical Systems
The 3/4 horsepower submersible motor features Class B insulation with built-in thermal overload protection, designed for continuous duty operation in demanding well pump applications.
This energy-efficient motor incorporates advanced winding techniques and premium bearing systems that minimize friction losses while maximizing power transfer to the pump assembly.
Operating on standard 230-volt single-phase electrical supply, the motor draws optimized amperage for efficient operation while maintaining compatibility with residential electrical panels and control systems.
The hermetically sealed motor design prevents water infiltration while the integrated thermal protection system automatically safeguards against overheating during extended pumping cycles or adverse operating conditions.
Comprehensive Flow Rate & Head Specifications
Capable of generating maximum head pressure of 390 feet, this deep well submersible pump delivers variable flow rates optimized for typical residential water consumption patterns and light commercial applications.
The pump performance curve demonstrates consistent efficiency across operating ranges from 5 to 25 gallons per minute, making it suitable for households with varying water demands.
The 1-1/4 inch NPT discharge outlet provides adequate flow capacity for standard residential plumbing systems while maintaining optimal velocity to prevent pressure drops throughout the distribution network.
Performance characteristics include smooth operation at depths from 50 feet to maximum recommended installation depth, with automatic performance adjustment based on well conditions and system demand.
Well Compatibility & Installation Requirements
Designed for installation in 4-inch diameter and larger water wells, this Myers submersible pump accommodates standard well casing sizes and installation hardware commonly used in residential and commercial applications.
The compact 4-inch pump diameter allows for easy insertion and removal during maintenance procedures while providing adequate clearance for proper water flow around the pump assembly.
Installation requirements include proper well pump accessories such as check valves, torque arrestors, safety cables, and electrical conduit systems.
The pump's balanced design minimizes vibration and mechanical stress on well casing and support systems while the integrated lifting lugs facilitate safe handling during installation and service procedures.
Versatile Water System Applications
Perfect for residential homes, agricultural operations, livestock facilities, and small commercial properties requiring reliable groundwater extraction from moderate to deep water wells.
This versatile submersible well pump excels in applications including primary household water supply, irrigation pump systems, livestock watering systems, and emergency backup water sources.
The consistent pressure delivery makes this pump ideal for modern homes with multiple bathrooms, laundry facilities, and water-intensive appliances.
Agricultural applications benefit from the reliable flow rates suitable for crop irrigation, greenhouse operations, and livestock watering systems where consistent water pressure is critical for operational efficiency and animal welfare.
Energy Efficiency & Operating Economics
Engineered with advanced hydraulic design principles, this 3/4 HP submersible pump maximizes water delivery while minimizing electrical consumption and operating costs.
The high-efficiency motor and optimized impeller geometry reduce power requirements compared to older pump technologies while maintaining superior pressure and flow characteristics.
Energy-saving features include reduced friction losses through smooth internal surfaces, optimized flow patterns that minimize turbulence, and precision-balanced rotating assemblies that reduce mechanical losses.
These efficiency improvements translate to lower monthly utility bills, reduced environmental impact, and improved system reliability over the pump's operational lifespan.
Advanced Pump Control & Protection Systems
Compatible with modern pump control systems including pressure tanks, pressure switches, variable frequency drives, and constant pressure controllers for enhanced system automation and protection.
The pump's electrical characteristics support integration with advanced control technologies that optimize performance and extend equipment life.
Recommended system components include properly sized pressure tanks for cycle reduction, quality pressure switches for automatic operation, and surge protection devices to safeguard electrical components.
Advanced control options such as variable speed drives can further enhance efficiency by matching pump output to real-time demand while reducing mechanical stress and energy consumption.
Maintenance Requirements & Service Intervals
Built for extended service intervals with minimal maintenance requirements when properly installed in suitable well conditions with appropriate pre-filtration and water treatment systems.
The stainless steel construction and sealed bearing assemblies resist wear from sand, sediment, and mineral deposits commonly encountered in groundwater applications.
Routine maintenance procedures include periodic electrical connection inspection, system pressure monitoring, and water quality testing to ensure optimal performance.
The robust construction typically provides 10-15 years of reliable service with proper installation practices, appropriate system sizing, and adherence to recommended maintenance schedules including annual system performance evaluations.
Water Quality Considerations & Pre-Treatment
While designed to handle typical groundwater conditions, optimal performance and longevity are achieved when used with appropriate water treatment systems for wells with high mineral content, aggressive water chemistry, or excessive sand and sediment.
Pre-treatment options include sediment filters, iron removal systems, and pH adjustment equipment.
Water quality factors affecting pump performance include pH levels, total dissolved solids, iron and manganese content, and abrasive particle concentration.
Professional water testing and analysis help determine appropriate pre-treatment requirements to maximize pump life and maintain optimal performance throughout the system's operational period.
Professional Installation & System Design
Proper installation by qualified well pump technicians ensures optimal performance, safety compliance, and warranty protection while maximizing system reliability and operational lifespan.
Professional installation includes proper electrical connections, adequate pump sizing, appropriate accessory selection, and compliance with local plumbing and electrical codes.
System design considerations include proper pump staging based on well characteristics, adequate pressure tank sizing for cycle optimization, appropriate control system selection, and integration with existing plumbing infrastructure.
Professional installation also ensures proper safety measures including electrical grounding, GFCI protection, and emergency shutoff capabilities.
Warranty Coverage & Technical Support
Every Myers submersible pump includes comprehensive manufacturer warranty coverage protecting against defects in materials and workmanship while providing peace of mind for your water system investment.
Factory-backed warranty terms cover motor, pump assembly, and electrical components when installed according to manufacturer specifications and industry best practices.
Technical support resources include installation guides, troubleshooting assistance, and replacement parts availability through authorized distributors.
Professional technical staff provide expert guidance for system design, installation questions, and performance optimization to ensure successful project completion and long-term satisfaction.
As your trusted water system specialist, Plumbing Supply And More maintains an extensive inventory of genuine Myers pumps, accessories, and replacement parts with fast shipping and expert technical support nationwide.
Our experienced team understands the critical importance of reliable water systems and provides comprehensive product knowledge and installation guidance for successful project completion.
We stock complementary system components including pressure tanks, control switches, electrical panels, and water treatment equipment to provide complete water system solutions.
Whether you're a professional contractor, agricultural operation, or homeowner, our commitment to customer satisfaction ensures you receive the right products, competitive pricing, and ongoing support for your specific water system requirements.
This Myers 3/4 HP submersible well pump (Model 2ST72-8PLUS-P4) represents the pinnacle of modern groundwater extraction technology, combining proven reliability with advanced engineering for superior performance in residential, agricultural, and light commercial applications.
Trust Plumbing Supply And More to deliver genuine Myers quality with the technical expertise and customer support your project demands for long-term success and satisfaction.
At PSAM, we prioritize the safe delivery of your order. Our team meticulously packs each item using high-quality materials to prevent damage during transit. For particularly large or delicate items, we employ specialized packaging solutions to ensure they reach you in perfect condition.
Will my order arrive on time? How can I stay updated on the progress?
We strive to process and ship orders promptly. Once your order is dispatched, you'll receive a confirmation email with tracking information, allowing you to monitor its progress. Our efficient order processing and reliable shipping partners ensure timely delivery, so you can enjoy your purchase without delay.
What if I change my mind about my purchase?
We understand that sometimes you may reconsider your purchase. PSAM offers a 30-day return policy for your convenience. If you're not completely satisfied, you can return the item in its original condition for a refund or exchange. Please note that return shipping costs are the responsibility of the customer. For more details, visit our Returns & Exchanges page.
What should I do if there’s an issue with my product?
Your satisfaction is our priority. If you encounter any issues with your product, please contact our customer service team immediately. We are committed to resolving any problems promptly, ensuring you receive the quality and service you deserve.
Are your products easy to install? Will there be instructions?
Many of our products are designed for straightforward installation and include detailed instructions to guide you through the process. For more complex installations, we recommend consulting a professional to ensure safety and optimal performance. Our commitment to quality ensures that our products are user-friendly and reliable.
What is the quality of your products like? Will they look like the pictures online?
At PSAM, we are committed to offering only the highest-quality products that meet our rigorous standards. While we may occasionally source similar items from multiple trusted vendors—such as copper fittings—you can rest assured that every product we sell is carefully vetted to deliver exceptional performance and durability. Unlike big-box stores, we focus on quality over quantity, offering products designed to exceed expectations and provide long-lasting value. The images on our website are accurate representations of the items you’ll receive, so you can shop with confidence, knowing that what you see is exactly what you’ll get.
